The surface should be clean, dry and free of grease. The aerosol should have room temperature. Best processing temperature 5 to 30°C. Before use, shake the aerosol. Distance to the surface to be treated approximately 25 to 30 centimetre.
Apply the adhesive spray in an equal layer.
For a permanent adhesion treat both parts to be glued, allow to dry 15 to 20 minutes and firmly press together.
For a temporary adhesion treat one of the parts to be glued, allow to dry for 5 to 10 minutes, and firmly press together.
When treating porous surfaces, apply several layers.
After use, clean the valve (turn aerosol upside down and press the nozzle for approximately 5 seconds).