Sealing Spray

MOTIP Sealing Spray is an easy to use flexible coating to seal and fill small leaks and cracks. It maintains its flexibility even with temperature changes and is suitable to use on different substrates, such as, metal, plastic, PVC, concrete, and vinyl. Sealing Spray can be used indoor and outdoor and is therefore ideal to seal small leaks and cracks on gutters, ventilations, drains and similar. MOTIP Sealing Spray is weatherproof, UV-resistant and over-paintable with different paint systems.

  • 3 colours
  • mat
  • 500 ML

Characteristics

  • Waterproof
  • Flexible
  • High filling properties
  • Weather- and UV-resistant
  • Over-paintable with different paint systems
  • User-friendly
  • For indoor and outdoor use

Technical Data Sheet

Usage instructions

Before use, carefully read the directions on the packaging and act accordingly.

The surface should be clean, dry and free of grease. Remove loose old lacquer and rust and lightly sand the surface. Clean and dry the surface again.

The aerosol should have room temperature. Best processing temperature 10 to 25°C.

Before use, shake the aerosol for 2 minutes and spray a sample. Distance to the surface to be treated approximately 25 to 30 centimeter.

Apply a first layer and let it dry for approximately 20 to 25 minutes.

Then apply a second layer, allow to dry for 5 minutes and check if the surface is sealed. If not, apply another layer. Before applying the next layer, again shake the aerosol. Allow a drying time of 5 minutes between the different layers.

After use, clean the valve (turn aerosol upside down and press the nozzle for approximately 5 seconds).

The drying time depends on the ambient temperature, the humidity of the air and the thickness of the layer applied.

Colours

black

500 ML
Mat
Art. nr. 07307
EAN 8711347266999

white

500 ML
Mat
Art. nr. 07309
EAN 8711347268962

grey

500 ML
Mat
Art. nr. 07308
EAN 8711347268948

* colours may differ from the preview above.

Related products

Clear Coat

Eloxal Spray

Zinc Spray

Alu-Zinc Spray

Spray Putty

Zinc Repair Spray

Choose your language

How to find a car paint colour code

Need to know the colour of your car? It’s actually located on your car. Even if two paint colours look the same, car manufacturers make loads of different exterior paint colours and they can all vary from year to year, so you need to make sure the code is right to get an exact paint match. Find out below where you can find your car’s colour.

Your car brand

Car example

Most common places

The image above shows the most common places where you can find your colour code. If you select your car brand you will see a specific image containing the locations for your vehicle.

Variation

Car manufacturers have different production series where they might use paints from different paint manufacturers. Therefore, it can occur there are slight changes in colour shade under the same car colour code. To supply everyone, MOTIP makes these variations available. Is there a check mark visible in this column? This means you have a colour code with variations. The differences are small. However, they may be noticeable. We simply cannot say precisely which article best matches the colour of your car. In this case, we’d recommend you check the colour chart at a shop. If you do want to try, always spray a small sample to check if the colour matches the colour of the car.