2K Clear Coat

MOTIP 2K Clear Coat is an extremely scratch resistant 2-component clear coat. It is highly fuel resistant, resistant to U.V.-rays and weather influences. Because of its very good flow and ease of polish. Offers optimal protection for high value paintings. The hardener for the 2-component product is integrated in a cartridge inside the can. As soon as the hardener inside the can is activated, the Clear Coat has to be used within 24 hours.

  • no colour
  • high gloss
  • 200 ML

Characteristics

  • 2K Clear Coat is a high-gloss protective lacquer from professional quality.
  • UV-resistant and non-fading.
  • Resistant to petrol, chemicals and weather influences.
  • Scratch free and shock proof.
  • Do not spray over synthetic resin paints.
  • Very efficient.

Technical Data Sheet

Safety data sheet(s)

Usage instructions

Before use, carefully read the directions on the packaging and act accordingly.

Pre Treatment: The surface should be clean, dry and free of grease.

To mix the hardener with the A component, place the can upside down on a flat surface.

Remove the protective cap from the bottom of the can.

Take the metal ring out of the protective cap and thread it into the pin.

Pull out the pin on the bottom of the can as far as it will go.

When filling a 2-K system it is essential to first mix the appropriate hardener with the lacquer before filling.

Treatment: The aerosol should have room temperature. Best processing temperature 10 to 25°C. Before use, shake the aerosol for 2 minutes and spray a sample. Distance to the surface to be treated approximately 20 to 25 centimetre.

Use within 24 hours after activation.

Fully dry after approx. 24 hours.

Colours

no colour

200 ML
High gloss
Art. nr. 04132
EAN 8711347266784

* colours may differ from the preview above.

Choose your language

How to find a car paint colour code

Need to know the colour of your car? It’s actually located on your car. Even if two paint colours look the same, car manufacturers make loads of different exterior paint colours and they can all vary from year to year, so you need to make sure the code is right to get an exact paint match. Find out below where you can find your car’s colour.

Your car brand

Car example

Most common places

The image above shows the most common places where you can find your colour code. If you select your car brand you will see a specific image containing the locations for your vehicle.

Variation

Car manufacturers have different production series where they might use paints from different paint manufacturers. Therefore, it can occur there are slight changes in colour shade under the same car colour code. To supply everyone, MOTIP makes these variations available. Is there a check mark visible in this column? This means you have a colour code with variations. The differences are small. However, they may be noticeable. We simply cannot say precisely which article best matches the colour of your car. In this case, we’d recommend you check the colour chart at a shop. If you do want to try, always spray a small sample to check if the colour matches the colour of the car.