Anti-Corrosion Primer

Protect steel parts and machines with MOTIP Anti-Corrosion Primer. Suitable as pre-treatment for topcoating with air drying alkyd resin varnishes. Fast-drying, lead-free red oxide primer to treat untreated surfaces of ferro-metal. Suitable as pre-treatment for respraying with air drying alkyd lacquer systems. Anti-corrosion primer has excellent coverage, filling properties and adhesion. MOTIP Anti Corrosion is weldable and easy to sand and has excellent corrosion prevention.

  • red brown
  • 500 ML

Characteristics

  • Excellent coverage and filling properties
  • Easy to sand
  • Excellent corrosion prevention
  • Suitable to protect wood
  • Weldable
  • Excellent adhesion
  • Misty spray pattern
  • Fast drying

Technical Data Sheet

Safety data sheet(s)

Usage instructions

Before use, carefully read the directions on the packaging and act accordingly.

The surface should be clean, dry and free of grease. Remove loose old lacquer and rust and sand the surface.

The aerosol should have room temperature. Best processing temperature 5 to 30°C.

Before use, shake the aerosol for 2 minutes and spray a sample.

Distance to the surface to be treated approximately 20 centimetre.

Apply anti corrosion primer in several layers. Before applying the next layer, again shake the aerosol.

After use, clean the valve (turn aerosol upside down and press the nozzle for approximately 5 seconds).

The drying time depends on the ambient temperature, the humidity of the air and the thickness of the lacquer applied.

Colours

red brown

500 ML
Art. nr. 090106
EAN 8711347226467

* colours may differ from the preview above.

Related products

Cable Protect

Impregnation Spray

Silicone Spray

Electro Protect
MoTip V-Belt Spray

V-Belt Spray

Electro Protect

Choose your language

How to find a car paint colour code

Need to know the colour of your car? It’s actually located on your car. Even if two paint colours look the same, car manufacturers make loads of different exterior paint colours and they can all vary from year to year, so you need to make sure the code is right to get an exact paint match. Find out below where you can find your car’s colour.

Your car brand

Car example

Most common places

The image above shows the most common places where you can find your colour code. If you select your car brand you will see a specific image containing the locations for your vehicle.

Variation

Car manufacturers have different production series where they might use paints from different paint manufacturers. Therefore, it can occur there are slight changes in colour shade under the same car colour code. To supply everyone, MOTIP makes these variations available. Is there a check mark visible in this column? This means you have a colour code with variations. The differences are small. However, they may be noticeable. We simply cannot say precisely which article best matches the colour of your car. In this case, we’d recommend you check the colour chart at a shop. If you do want to try, always spray a small sample to check if the colour matches the colour of the car.