PTFE Dry

MOTIP PTFE Dry provides good lubrication and leaves a dry surface. Its very low friction factor formula makes it perfect for use on mechanisms that are regurlary used such as chains, tools, drills, rails, lock mechanisms and many more applications. PTFE Dry is dry surface lubricant that removes oil and grease from metal and plastic parts. It has a very low friction factor preventing wear and sticking, offers excellent adhesion and is resistant to the weather. Suitable for parts that are subjected to light loads and low speed. It can be used as a release agent for moulds when the use of silicone is not required.

  • transparent white
  • 2 volumes
    • 200 ML
    • 500 ML

Characteristics

  • No residues of oil or grease (dry film)
  • Very low friction factor
  • Prevents wear and sticking
  • Suitable for parts which are liable to light load and low speed
  • Suitable as release agent for moulds, where the use of silicones is not desired
  • Excellent adhesion
  • Resistant to weather influences
  • Directed jetspray

Technical Data Sheet

Safety data sheet(s)

Usage instructions

Before use, carefully read the directions on the packaging and act accordingly.

The aerosol should have room temperature.

Best processing temperature 10 to 25°C.

Before use, shake the aerosol.

Apply PTFE dry in a thin layer. After evaporation of the solvent (approximately 1 minute) a protecting, dry PTFE film will remain.

Colours

transparent white

500 ML
Art. nr. 090201
EAN 8711347226245

transparent white

200 ML
Art. nr. 290201
EAN 8711347235971

* colours may differ from the preview above.

Related products

PTFE Oil

White Grease

Industrial Chain Grease

Multi Spray

Multi Spray (Drum)

Cable Anti-Friction Spray

Choose your language

How to find a car paint colour code

Need to know the colour of your car? It’s actually located on your car. Even if two paint colours look the same, car manufacturers make loads of different exterior paint colours and they can all vary from year to year, so you need to make sure the code is right to get an exact paint match. Find out below where you can find your car’s colour.

Your car brand

Car example

Most common places

The image above shows the most common places where you can find your colour code. If you select your car brand you will see a specific image containing the locations for your vehicle.

Variation

Car manufacturers have different production series where they might use paints from different paint manufacturers. Therefore, it can occur there are slight changes in colour shade under the same car colour code. To supply everyone, MOTIP makes these variations available. Is there a check mark visible in this column? This means you have a colour code with variations. The differences are small. However, they may be noticeable. We simply cannot say precisely which article best matches the colour of your car. In this case, we’d recommend you check the colour chart at a shop. If you do want to try, always spray a small sample to check if the colour matches the colour of the car.