Effect Enamel

Fast drying nitro cellulose lacquer with good filling properties to embellish and repair pottery and enamelled surfaces. Enamel
lacquer is resistant to cleaners and is wear resistant and scratch
free. Deco Effect Enamel lacquer has good adhesion, good surface
hardness and a lasting gloss.

  • 400 ML

Characteristics

  • Excellent coverage
  • Fast drying
  • Lasting gloss

Technical Data Sheet

Safety data sheet(s)

Usage instructions

The surface should be clean, dry and free of grease. Slightly sand the surface (grain 600).

The aerosol should have room temperature. Best processing temperature 15 to 25°C. Before use, shake the aerosol for 2 minutes and spray a sample. Distance to the surface to be treated approximately 25 to 30 centimetre.

Apply the lacquer in several thin layers. Before applying the next layer, again shake the aerosol.

After use, clean the valve (turn aerosol upside down and press the nozzle for approximately 5 seconds).

Drying time must be at least 24 hours.

Water resistant after 7 days.

The drying time depends on the ambient temperature, the humidity of the air and the thickness of the lacquer applied.

Colours

400 ML
Art. nr. 303203
EAN 8711347243945

* colours may differ from the preview above.

Related products

High temp

Effect Frigo White

Effect Granite

Effect Clear Lacquer

Effect Metallic

Effect Fluor

Choose your language

How to find a car paint colour code

Need to know the colour of your car? It’s actually located on your car. Even if two paint colours look the same, car manufacturers make loads of different exterior paint colours and they can all vary from year to year, so you need to make sure the code is right to get an exact paint match. Find out below where you can find your car’s colour.

Your car brand

Car example

Most common places

The image above shows the most common places where you can find your colour code. If you select your car brand you will see a specific image containing the locations for your vehicle.

Variation

Car manufacturers have different production series where they might use paints from different paint manufacturers. Therefore, it can occur there are slight changes in colour shade under the same car colour code. To supply everyone, MOTIP makes these variations available. Is there a check mark visible in this column? This means you have a colour code with variations. The differences are small. However, they may be noticeable. We simply cannot say precisely which article best matches the colour of your car. In this case, we’d recommend you check the colour chart at a shop. If you do want to try, always spray a small sample to check if the colour matches the colour of the car.