Heat Resistant Clear Coat

Use Heat Resistant Clear Coat from MOTIP to treat treated and untreated surfaces that are exposed to temperatures up to 800°C on your car. Heat Resistant Clear Coat is resistant to petrol, chemicals and weather influences.

  • no colour
  • mat
  • 400 ML

Where to buy

Characteristics

  • Resistant to petrol, chemicals and weather influences
  • Excellent adhesion
  • Heat resistant

Usage instructions

Before use, carefully read the directions on the packaging and act accordingly.

Pre Treatment: The surface should be clean, dry and free of grease. Remove loose old lacquer and rust and slightly sand the surface. Do not apply any primer.

Treatment: The surface should be clean, dry and free of grease. The aerosol should have room temperature. Best processing temperature 10 to 25°C. Before use, shake the aerosol for 2 minutes and spray a sample. Distance to the surface to be treated approximately 25 to 30 centimetre

Apply the heat resistant clear lacquer in several thin layers. Before applying the next layer, again shake the aerosol. Allow to dry at room temperature for one hour. Then, heat for 30 to 60 minutes (160°C) in order to harden the paint layer. Smoke develops during the lacquer hardening process.

After use, clean the valve (turn aerosol upside down and press the nozzle for approximately 5 seconds).

The drying time depends on the ambient temperature, the humidity of the air and the thickness of the lacquer applied.

Colours

no colour

400 ML
Mat
Art. nr. 04033
EAN 8711347040339

* colours may differ from the preview above.