Metal Putty

Level irregularities in surfaces of steel, aluminium, wood, concrete and polyester on your car with MOTIP 2-component Metal Putty. As a result of the addition of aluminium pigments, very easy to draw and consequently, ideal for treating larger surfaces. Metal putty is elastic and very easy to sand. Metal putty can be resprayed with all paints and is resistant to chemicals and the weather. MOTIP Metal Putty can be applied in layers with a thickness up to 2 cm.

  • silver grey
  • mat
  • 2 volumes
    • 1,00 KG
    • 250 G

Where to buy

Characteristics

  • Easy to draw
  • Very easy to sand
  • Elastic
  • Re-sprayable with all lacquer systems
  • Resistant to chemicals and weather influences
  • Excellent adhesion

Usage instructions

Before use, carefully read the directions on the packaging and act accordingly.

Processing temperature 15 – 25°C.

The surface should be clean, dry and free of grease. Remove loose old lacquer and rust and sand the surface.

Mix the required amount of putty with the harder. Apply in the desired layer thickness.

After hardening, sand and when desired apply a fine putty.

The drying time depends on the ambient temperature.

After use, directly clean the tools used. Do not store the surplus material, mixed with harder, in the can.

Colours

silver grey

250 G
Mat
Art. nr. 00086
EAN 8711347000869

silver grey

1,00 KG
Mat
Art. nr. 00087

* colours may differ from the preview above.