Glass Fibre Putty Filled

Fill deeper damage like holes in surfaces of steel, aluminium, wood, concrete and polyester with MOTIP 2-component Glass Fibre Putty (filled). Glass Fibre putty is easy to sand and has excellent filling properties. Glass Fibre putty offers high impact resistance and may be resprayed with all paints. It is resistant to chemicals and the weather and can be applied in layers up to 2 cm in thickness.

  • grey
  • mat
  • 2 volumes
    • 1,00 KG
    • 250 G

Where to buy

Characteristics

  • Easy to sand
  • Excellent filling properties
  • High impact resistance
  • Re-sprayable with all lacquer systems
  • Resistant to chemicals and weather influences
  • Excellent adhesion

Technical Data Sheet

Safety data sheet(s)

Usage instructions

Before use, carefully read the directions on the packaging and act accordingly

Processing temperature 15 – 25°C.

The surface should be clean, dry and free of grease. Remove loose old lacquer and rust and sand the surface

Mix the required amount of putty with the harder. Apply in the desired layer thickness. After hardening, sand and when desired apply a fine putty.

The drying time depends on the ambient temperature

After use, directly clean the tools used. Do not store the surplus material, mixed with harder, in the can.

Colours

grey

250 G
Mat
Art. nr. 000053
EAN 8711347000531

grey

1,00 KG
Mat
Art. nr. 000070
EAN 8711347000708

* colours may differ from the preview above.

Related products

Finishing Putty

Polyester Putty

Polyester Repair Set

Polyester Putty (Profi)

Polyester Putty 'Soft' (Profi)

Plastic Repair Putty

Choose your language

How to find a car paint colour code

Need to know the colour of your car? It’s actually located on your car. Even if two paint colours look the same, car manufacturers make loads of different exterior paint colours and they can all vary from year to year, so you need to make sure the code is right to get an exact paint match. Find out below where you can find your car’s colour.

Your car brand

Car example

Most common places

The image above shows the most common places where you can find your colour code. If you select your car brand you will see a specific image containing the locations for your vehicle.

Variation

Car manufacturers have different production series where they might use paints from different paint manufacturers. Therefore, it can occur there are slight changes in colour shade under the same car colour code. To supply everyone, MOTIP makes these variations available. Is there a check mark visible in this column? This means you have a colour code with variations. The differences are small. However, they may be noticeable. We simply cannot say precisely which article best matches the colour of your car. In this case, we’d recommend you check the colour chart at a shop. If you do want to try, always spray a small sample to check if the colour matches the colour of the car.