Finishing Putty

Level small, superficial irregularities in surfaces of steel, aluminium, wood and polyester on your car with fast drying MOTIP Finishing Putty. Finishing putty has a fine structure and is easy to sand. MOTIP Finishing putty is re-sprayable with all lacquer systems and can be applied in layers up to 0.5 mm.

  • olive green
  • mat
  • 250 G

Where to buy

Characteristics

  • Easy to sand
  • Fast drying
  • Re-sprayable with all lacquer systems
  • Very fine structure
  • Excellent adhesion

Technical Data Sheet

Safety data sheet(s)

Usage instructions

Before use, carefully read the directions on the packaging and act accordingly.

Processing temperature 15 – 25°C.

The surface should be clean, dry and free of grease. Remove loose old lacquer and rust and sand the surface.

Apply the finishing putty in the desired layer thickness with an applicator.

The drying time depends on the ambient temperature.

After use, directly clean the tools used.

Colours

olive green

250 G
Mat
Art. nr. 000063
EAN 8711347268900

* colours may differ from the preview above.

Related products

Polyester Putty

Glass Fibre Putty Filled

Polyester Repair Set

Polyester Putty (Profi)

Polyester Putty 'Soft' (Profi)

Plastic Repair Putty

Choose your language

How to find a car paint colour code

Need to know the colour of your car? It’s actually located on your car. Even if two paint colours look the same, car manufacturers make loads of different exterior paint colours and they can all vary from year to year, so you need to make sure the code is right to get an exact paint match. Find out below where you can find your car’s colour.

Your car brand

Car example

Most common places

The image above shows the most common places where you can find your colour code. If you select your car brand you will see a specific image containing the locations for your vehicle.

Variation

Car manufacturers have different production series where they might use paints from different paint manufacturers. Therefore, it can occur there are slight changes in colour shade under the same car colour code. To supply everyone, MOTIP makes these variations available. Is there a check mark visible in this column? This means you have a colour code with variations. The differences are small. However, they may be noticeable. We simply cannot say precisely which article best matches the colour of your car. In this case, we’d recommend you check the colour chart at a shop. If you do want to try, always spray a small sample to check if the colour matches the colour of the car.